UV-VIS Absorption Lab Test Report for Auro Liquid Gold
ENVIROTEK LABORATORIES, INC.
7150 North Park Drive, Suite 410, Pennsauken, NJ 08109
PHONE 856-478-0010 www.enviroteklab.com
EPA ID # NJ01298 NJ DEP ID # 08012
UV-VIS ABSORPTION TEST REPORT
Report # 13-24-Auro Liquid Gold Mineral Solution UV-Vis Absorption test
Customer Name: Auro LLC
Report Date: February 5, 2013.
SUMMARY
Auro Liquid Gold mineral solution was tested for Ultraviolet/Visible absorption compare to the absorption of tap and Ultrapure water. The mineral solution shows a high absorption in the range of 190 to 380 nm (Ultraviolet), and very low absorption in the range of 380 to 750 nm (visible range).
INTRODUCTION
Auro Liquid Gold mineral solution was scanned for Ultraviolet/Visible absorption and compared to the absorption of Tap and Ultrapure water. The Auro mineral solution shows a high absorption in the range of 190 to 380 nm (Ultraviolet), and very low absorption in the range of 380 to 750 nm (visible range). The high absorbency of the Auro Liquid Gold Mineral solution could be related to the formation of crystalline water mentioned in the research
work of Dr. Gerald Pollack of the University of Washington.
REAGENTS AND LAB EQUIPMENT
Shimadsu UV/Vis Spectrometer model 1601 with Data system
Ten Centimeters Quartz cells Ultrapure Water (ASTM Reagent Type IV water)
Tap water Auro Liquid Gold Mineral Solution.
PROCEDURE
The Auro Liquid Gold mineral solution was prepared diluting 2 mL of Auro Liquid Gold in 1L of Tap water. The solution was tested after 6 days of sitting undisturbed in the laboratory bench. A scan in the range of 190 to 810 nm
was performed with the Ultrapure water (ASTM Reagent Type IV water) to establish the baseline, then the Tap water was scan in the same range, and finally the diluted Auro Liquid Gold Mineral Solution. The spectra are
included in the Results section.
RESULTS:
Figure 1. Ultrapure water (ASTM Reagent Type IV) UV-Vis scan range 190-810 nm.
CONCLUSION
Auro Liquid Gold Mineral Solution shows high absorption of UV light with a maximum in the range of 190 to 200 nm, the Tap water shows a maximum absorption at 270 nm of 0.0732 which is very small compare to the Auro Liquid Gold solution absorption, the Ultrapure water does not show any absorption in the range of 190 to 810 nm. The high absorbance of the Auro Liquid Gold Mineral solution could be related to the formation of crystalline water mentioned in the research work of Dr. Gerald Pollack of the University of Washington (G. H. Pollack and J. Clegg, Unexpected linkage between unstirred layers, exclusion zones, and water, In Phase Transitions in Cell Biology, G.H. Pollack and W.-C. Chin (eds.), (Springer Science+Business Media B.V., 2008) pp. 143-152).
Jaime A.Young
Jaime A. Young
Lab Director
Download the source document here: Auro Liquid Gold UV-VIS ABSORPTION TEST REPORT